Scoreboard with Stoplights, Jumbo display and Scrolling Message (48Hx72W)

This outdoor scrolling message sign is brighter and bigger than our standard scrolling message sign.  Instead of an IR remote, the scrolling message sign is programmed using an ethernet connection and software on a connected PC.

Physical Display Area: 320mm x 1600mm  (6.3" x 63")

Resolution DPI: 16 pixels X 160 pixels

NOTE: Ethernet control of the scrolling message is REQUIRED. signs shipped with this component will include a network controller by default. To make updates to the display you must access the sign via the webpage provided by the network controller.  This will require an ethernet connection to the sign.

We source each of these LED stoplight modules from a traffic signal company so each is 8" in diameter and very visible!  The lights are controlled with our own stoplight controller module which allows you to set each light to on off or flashing.  All control methods are supported by this controller so you can configure the light manually with a pushbutton on the controller, with the IR remote, or via our network controller board.

Configurability
9 levels of brightness 
Set Light On, Off or Flashing
Three different flashing speeds

For a walkthrough of how to program your stoplight, check out this video.

We source each of these LED stoplight modules from a traffic signal company so each is 8" in diameter and very visible!  The lights are controlled with our own stoplight controller module which allows you to set each light to on off or flashing.  All control methods are supported by this controller so you can configure the light manually with a pushbutton on the controller, with the IR remote, or via our network controller board.

Configurability
9 levels of brightness 
Set Light On, Off or Flashing
Three different flashing speeds

For a walkthrough of how to program your stoplight, check out this video.

We source each of these LED stoplight modules from a traffic signal company so each is 8" in diameter and very visible!  The lights are controlled with our own stoplight controller module which allows you to set each light to on off or flashing.  All control methods are supported by this controller so you can configure the light manually with a pushbutton on the controller, with the IR remote, or via our network controller board.

Configurability
9 levels of brightness 
Set Light On, Off or Flashing
Three different flashing speeds

For a walkthrough of how to program your stoplight, check out this video.